Właściwie nie kula, tylko hosoedr. I nie pudełko, tylko globus, lampa, ozdoba lub co zechcesz.
The radius of the assembled sphere
The amount of gores/parts you want the sphere to have, has to be at least 3
The size of the circular hole at the top
The size of the polygonal hole at the bottom
Add scoring lines to easier fold tabs
A hook to hang the sphere on a cable (for e.g. lamps), the amount of gores that have a hook
The radius of the cable for the cable hook
The length of the tabs on the corners (in mm)(not supported everywhere). Keep as small as your material strength allows for cleaner result
The width of the tabs (in mm)
grubość materiału w mm; od niej zależy głębokość wczepów 🛈
korekta szczeliny w mm = POŁOWA szerokości cięcia lasera (kontur przesuwa się o tę wartość w każdą stronę). Uwaga: w edytorze pudełek wpisuje się PEŁNĄ szerokość cięcia, tu połowę. Większa wartość = ciaśniejsze spasowanie. Wartość dobierzesz wzorcem do kalibracji szczeliny. 🛈
format pobieranego pliku 🛈
podpisz części (gdzie to możliwe)
dodaj prostokąt kontrolny o podanej długości w mm (zero = bez prostokąta) 🛈
The number of tabs. This has to be an even number
dodaj do pliku kod QR z linkiem do tych ustawień
kształt narożników wewnętrznych 🛈
odstęp wokół części (wielokrotność grubości [: dodatkowe mm]) 🛈
rysuj obrysy pomocnicze niektórych elementów 🛈
Generuj Pobierz Zapisz w adresie Kod QR
With Voronoi pattern added: